About our Carbs
We are the North American Distributor for Mikuni PHH carbs and parts. We ship worldwide. If you don't see what you need, drop us a line and ask. We are a stocking distributor for 40mm, 44mm, and even the 50mm PHH automotive sidedraft carbs.
All carb listings are pairs unless otherwise noted - Triples can be setup for Z-cars by request. See our custom carb and manifold gallery where the carbs are completely rebuilt, custom jetted and venturied to your application, mounted with refurbished insulators w/new o-rings. Ready to bolt on and go. Complete packages include 2 extra sets of jets and a copy of the Mikuni Tuning and Maintenance manual .50mm Race Carbs
50mm Race Carbs
A Pair of refurbed /Rebuilt 50's, (no linkage, no air horns but are available as extras) ..........................SOLD
50mm Setups
TRIPLE 50’S ON A BRAND NEW KAMEARI L6 MANIFOLD WITH Linkage COMPLETE!
The ultimate race setup, especially for vintage (air horns additional)..............................SOLD
Dual 50’S ON AN ORIGINAL, DATSUN COMPETITION L4 MANIFOLD WITH ALL NEW EVERYTHING!!
Refurbed carbs , insulators, OEM Style Refurbed Linkage setup (air horns included)
The ultimate race setup, especially for vintage…...................SOLD
44mm Carbs
44mm Carbs
****************************************************************************************************
44 Mikuni NOS Carbs - Matched Pair
New Old Stock, never used, never had gas in them. With standard side linkage and fuel inlet pipes,
Airhorns not included but available.................................................SOLD
44mm Mikuni's Pair - Completely rebuilt
excellent shape, ready to go, no linkage, no air horns but in stock and available....................................$ 925.00 None Available
44mm Mikuni's Pair- competition prepared
completely rebuilt, comp jetted - excellent shape, ready to go...no air horns or linkage but available.........$ 1050.00 None Available
44mm setups
Competition Prepared 44 Mikuni's DOUBLES on long runner ORIGINAL Gerolamy Datsun Comp Manifold
with insulators & horns, New jets, jet blocks, Comp Jetted et al for 4 Cyl L-Series motors........$ 1675.00 None Available
U20 Roadster setup with Refurbed Mikuni/ Solex 44's on Roadster manifold
Ready to bolt on and go. OEM 50mm horns. OEM refurbed linkage, cable standoff, Insulators on a completely refurbed Manifold and water tube.
This setup is 100% Datsun Roadster stuff!! Make that Roadster restoration 100 point! None Available
40mm Carbs
40mm CARBS
40mm Mikuni's -
Completely rebuilt, excellent shape, ready to go, no linkage, no air horns but in stock and available.................$ 775.00 None Available
2 BRAND NEW OLD STOCK 40mm CARBS w/std side linkage..................................$1200 None Available
4 Cylinder Datsun Manifolds
4 Cylinder Datsun Manifolds
Z20/Z22/Z24 Dual Sidedraft manifolds, Brand new, unused, no linkage...........$300 None Available
Mikuni 4 cylinder L-series w/Linkage...........................................................SOLD
Cannon Style long runner L-series w/linkage................................................$325 None Available
6 Cylinder Datsun Manifolds
6 Cylinder Datsun Manifolds
None available right now
Mikuni Carb Parts
MIKUNI CARB PARTS & ACCESSORIES
We are the North American Distributor for Mikuni PHH carbs and parts. We ship worldwide.
If you don't see what you need, drop us a line and ask.
We are stocking distributor for 40mm, 44mm, and even the 50mm PHH automotive sidedraft carbs.
Virtually every part is in stock. Let us know your needs.
WE HAVE MIKUNI JETS, CHOKES, VENTURIS, NEEDLE VALVES, INTAKE HORNS & MORE!!!!!!
We have all the Gaskets and Needle/Seats & Floats for 50mm carbs - in stock!!!
We also do competition prep to Mikuni carbs and Nissan Motorsports insulators. Ask for details.
Examples: | 40mm Carbs | 44mm Carbs 50mm Carbs |
30mm Venturis 32mm Venturis 34mm Venturis 36mm Venturis |
34mm Venturis 38mm Venturis |
44mm carb venturis are OEM stock pieces @ $22 each, $88/set of 4
50mm Carb Venturis are custom WCR Billet units @ $125/set of 4 (can also be opened up to 39, 40, 42, 44, 45 size @ additional cost)
Mikuni Carb Diagrams, Parts, & Gasket Lists
Main Fuel Jets and Air Jets are $ 4.00 /ea
Pilot (Idle) Jets are $ 4.00/ea
Pump Jets are $ 6.00/ea
Needle valves for both 40's and 44's - 1.8 size and 2.0 size are $ 25 /ea S4 & Type Q are $30/ea
Accel Pump Diaphragms are $25 ea
Full Radius custom TWM 50mm Carb air horns - INQUIRE
Jet Blocks are $ 24/ea
K&N Style cleanable element filters in Chrome Housing...1 3/4" tall $38 ea, - 3 1/2" tall $45 ea (will not allow airhorns underneath)
Copy of the Mikuni Service Manual - Maintenance and tuning, doesn't get any more in depth than this!........$ 10.00
MIKUNI FACTORY REBUILD GASKET KITS FOR 40's or 44's are $30/carb. Kits do not include pump diaphragms or needle/seats.
MASTER REBUILD KITS include pump diaphragms and needle/seats. $75 per carb for 40's & 44's
To place an order for carb parts, email us with the TYPE and SIZE carb based on the info on our Carb ID page. Then tell us the ITEM# and quantity of the parts you want. Tell us your Zip code or shipping. We will then send you by email a detailed payment invoice for secure online use with CC or Paypal. Thanks much.